Metal roofing delivers the ultimate combination of durability, energy efficiency, and hurricane resistance. Modern metal systems are engineered for extreme weather and 50+ year lifespans.
Metal roofs outperform conventional materials in Florida's harsh climate.
50-70 year lifespan typical. No organic materials to rot or decay. Resistant to cracking, shrinking, and erosion from salt air.
Standing seam systems with concealed fasteners rated for 170+ mph winds. Interlocking panels and mechanical seams withstand extreme uplift forces.
Reflective metal coatings reduce cooling costs by 25-40%. Cool roof ratings lower surface temperatures by 50-60°F compared to dark shingles.
Metal roofing represents the cutting edge of roofing technology. With the highest wind ratings and longest warranties available, metal is engineered for extreme performance.
Standing seam metal roofs are the top choice for coastal properties, modern architecture, and homeowners who demand the absolute best in storm protection and energy efficiency.
Premium metal roofing system with concealed fasteners and raised vertical seams. Best performance and aesthetics.
More affordable exposed-fastener system. Good performance with proper maintenance. Common for agricultural and industrial buildings, some residential.
Metal formed to resemble traditional roofing materials. Combines metal benefits with conventional aesthetic.
The right choice comes down to wind goals, maintenance preference, and how long you plan to keep the property.
Screw-down systems reduce upfront cost, while standing seam costs more initially but often lowers long-term maintenance risk.
If maximum hurricane resilience is your priority, standing seam with proper clips and detailing is the highest-performance route.
Choose aluminum near the coast for corrosion resistance, or steel inland for value and strength with broad style options.
Metal roof installation requires specialized skills and proper technique for wind performance.
Ensure solid deck with proper fastening. Metal can be installed over existing shingles in some cases, or on solid deck with underlayment.
Install high-temperature synthetic underlayment (metal gets hot). Ensure proper ventilation to prevent condensation on underside of panels.
Install metal trim pieces at eaves, rakes, and ridges before field panels. Proper flashing critical for water management and wind resistance.
Install panels from one edge, securing with concealed clips (standing seam) or fasteners (screw-down). Each panel interlocks with previous. Proper fastener spacing per manufacturer specs essential for wind rating.
For standing seam, mechanically seam panels together with seaming tool. Install ridge caps, penetration flashings, and final trim pieces. Seal all penetrations.
High Velocity Hurricane Zones require tested and approved systems. Standing seam with properly spaced clips achieves highest wind ratings. Miami-Dade NOA or Florida Product Approval required in some counties.
Salt air accelerates corrosion. Within 3 miles of coast, aluminum strongly recommended. If using steel, specify marine-grade coatings and increase inspection frequency.
Florida heat causes metal expansion/contraction. Standing seam systems accommodate movement through clip design. Fixed fastener systems must account for expansion to prevent oil canning and fastener failure.
Rain noise is common concern. Solid deck installation (vs open purlins) reduces noise significantly. Adequate attic insulation helps with noise and thermal performance.
Metal roofing costs 2-3x more than shingles initially, but offers superior long-term value.
Life-cycle cost analysis often favors metal despite higher upfront cost. When factoring longevity, energy savings, and avoided re-roofing, metal provides strong ROI over 30+ year ownership.
Common questions about metal roofing in Florida
Metal roofs typically last 40-70 years in Florida, depending on the material. Aluminum can last 50+ years even in coastal areas. Galvanized steel lasts 40-60 years inland but may corrode faster near the coast without proper coatings. Standing seam systems last longer than screw-down due to better handling of thermal expansion. Warranties typically range from 30-50 years with proper maintenance.
Not significantly on residential installations. Metal over solid decking (plywood/OSB) with underlayment and attic insulation produces minimal noise—comparable to other roofing materials. The "tin roof" sound comes from metal over open purlins without insulation, which is rare in modern homes. Most homeowners report metal roofs are quieter than expected, especially during Florida's frequent afternoon thunderstorms.
Standing seam has concealed fasteners and mechanically seamed vertical ribs, allowing panels to expand/contract freely. It achieves highest wind ratings but costs more. Screw-down panels have exposed fasteners through the face, are more affordable, but fasteners must be maintained and can leak over time. For Florida, standing seam is preferred for coastal areas and premium installations, while screw-down works well for budget-conscious inland projects.
Properly coated metal roofs resist rust very well. Aluminum doesn't rust (it oxidizes harmlessly). Galvanized steel has zinc coating that protects the metal. Quality steel panels also have paint coatings (Kynar 500/PVDF) that provide additional protection. Coastal areas (within 3 miles of saltwater) should use aluminum or steel with marine-grade coatings. Regular inspection of fasteners and scratched areas prevents rust from starting.
Get a free estimate and system consultation. We'll discuss metal roofing options, installation process, and costs before any commitment.
